How to maintain glass What glass can be maintained

Glass is like a person's eyes, which determines the safety of people looking at things. Glass can not get immediate conservation will bring people all kinds of trouble, some people in the maintenance of glass, only to some of the big trouble for maintenance, in fact, there are many small details have not been dealt with, it is easy to ignore the glass , If those who will be careful to clean the glass clean, but also bring their own look very clean, the mood will be better.

How to maintain the following five kinds of glass:

1, usually do not force the collision glass surface, for the anti-glass surface scratches, the best shop on the tablecloth. When you put things on the glass furniture, to gently, avoid collision.

2, daily cleaning, wipe with a wet towel or newspaper can be, in case of stains can be towel dipped in beer or warm vinegar to erase, you can also use the market to sell glass cleaning agent, avoid acidity Strong solution is clean. Winter glass surface easy to frost, can be dipped in salt water or white wine to wipe, the effect is very good.

3, a pattern of wool glass once dirty, can be dipped in a toothbrush with detergent, along the pattern can be removed to remove the circular wipe. In addition, you can also drop the kerosene on the glass or with chalk ash and gypsum powder dipped in water on the glass to dry, and then wipe with a clean cloth or cotton, so that the glass is clean and bright.

4, the best glass furniture placed in a more fixed place, do not arbitrarily move back and forth; to place objects smoothly, heavy objects should be placed at the bottom of glass furniture to prevent the furniture center of gravity caused by instability. In addition, to avoid moisture, away from the stove, with acid, alkali and other chemical reagents isolated to prevent corrosion deterioration.

5, the use of plastic wrap and sprayed with a wet cloth can also be so often stained with oil glass "regain new life." First of all, the glass was completely sprayed with detergent, and then paste the plastic wrap, so that the solidification of the oil softening, after ten minutes, tear off the plastic wrap, and then wipe with a damp cloth. In order to keep the glass bright and clean, you must always hands clean, glass if there is a handwriting, can be used rubber water immersion friction, and then wipe with a damp cloth; glass if the paint, cotton can be dipped in vinegar scrub; clean with a dry cloth dipped in alcohol glass , Can make it bright as crystal.

There are five precautions:

1, in the transport process in order to avoid unnecessary losses, we must pay attention to fixed and soft pad. It is generally recommended to use an upright method of transport. Vehicles should also be kept steady and slow.

2, the other side of the glass installation is closed, pay attention to clean the surface before installation. It is best to use a dedicated glass cleaner, and to be dry after confirming that there is no stains before installation, the installation of the best use of clean building gloves.

3, the installation of glass, to use silicone sealant for fixed, in the windows and other installation, but also with the rubber seal with the use.

4, after the completion of construction, we should pay attention to stickers anti-collision warning signs, generally can not use stickers, color electrical tape, etc. to be prompted.

5, do not use sharp objects collision.

Wipe the glass

1, wipe the glass: first with a towel to wipe the glass frame, and then stained with glass after the dilution of the glass aqueous solution, even from top to bottom smear the glass, and then repeat the above process, with a glass scraping from scratch to clean, Dry towel to clean the water marks left on the box, the water marks on the glass must be wiped clean with glass, otherwise it will leave a trail on the glass.

    2, the vinegar and water by 1: 2 ratio of harmony, into the spray, spray on the glass and then wipe, you can polish very clean.

3, in the basin by adding 5% of the Ammonia solution or gasoline, with its cleaning glass, until the glass is dry and then wipe clean with a dry cloth, the glass can be spotless, bright and transparent. In the wipe of the glass, you can use the different models with a different window to see whether it is double glass or double glass. Use the wiping window to facilitate, effort and safety.

4, such as glass surface moldy phenomenon, can be hydrofluoric acid (HF) and water 1: 8 ratio of reconciliation (Note: more than 1: 8, will cause damage to the hand), wipe the glass. Note: must do a good job of corrosion protection work, the skin can not contact HF, otherwise it will be serious corrosion! Wipe the glass, wipe with water again, and finally the glass dry.