Precautions for using glass washer

The physical principle of glass cleaning machine is the transducer will be converted into high-frequency energy into mechanical energy, will produce a very small amplitude of high-frequency vibration and spread to the cleaning tank in the solution, under the action of the transducer, the cleaning solution The interior will continue to produce a large number of tiny bubbles and instantaneous rupture, each bubble burst will produce hundreds of degrees of high temperature and nearly a thousand atmospheric shock wave, which will wash the workpiece clean. The advent of glass cleaning machine to the mirror in the system, vacuum coating, steel, hot bending, hollow glass sheet and other deep processing technology before the process of cleaning the glass surface, drying equipment to provide a convenient.

Use glass cleaning machine should pay attention to:

(1) glass cleaning machine because it is a button control, so pay attention to the first blower, after the heater. First off the heater, after the blower. This order we do not forget.

(2) glass cleaning machine in the stop when the motor must be zero to the speed regulator, or there may be unnecessary trouble.

(3) glass cleaning machine glass discharge is a regular, must be in the specified limit discharge.

(4) glass cleaning machine motor above an emergency stop button, you can use in an emergency situation, usually do not touch.

(5) glass cleaning machine When the glass plate thickness changes, we must promptly adjust the level of the wind knife, or will cause unnecessary damage to the accident occurred.

(6) glass washing machine water level control in the 200-250mm between, not high, low water.